ESP Easy Mega: Collection_B ESP32_ЦЕХ_1

Task Settings

Device:

Analog input - internal ? i

Name:

Enabled:

Data Source

Remote Unit:

[Unknown Unit Name]

Note: 0 = disable remote feed, 255 = broadcast

Device Settings

Analog Pin:

Note: Do not use ADC2 pins with WiFi active

Attenuation:

Oversampling:

Factory Calibration

Apply Factory Calibration:

Note: When checked, reading is in mV

Factory Calibration Type:

Calibration Line Fitting

Calibration Curve:

Current ADC raw value:

Attenuation @0 dB:

Range / Step: 0 ... 818 [mV] / 0.100 [mV]

Attenuation @2.5 dB:

Range / Step: 0 ... 1127 [mV] / 0.138 [mV]

Attenuation @6 dB:

Range / Step: 0 ... 1401 [mV] / 0.171 [mV]

Attenuation @12 dB:

Range / Step: 0 ... 2636 [mV] / 0.322 [mV]

Two Point Calibration

Calibration Enabled:

Point 1:

≙

Point 2:

≙

Note: Input float values will be stored as int, calibration values will be adjusted accordingly

Current:

0.00

Multipoint Processing

Multipoint Processing Enabled:

Nr Multipoint Fields:

Split-Paste Multipoint Fields:

Note: When checked, a set of tab, space or newline separated values can be pasted at once.

Data Acquisition

Single event with all values:

Note: Unchecked: Send event per value. Checked: Send single event (#All) containing all values

Send to Controller ❶

(Home Assistant (openHAB) MQTT, disabled)

Send to Controller ❷

(Home Assistant (openHAB) MQTT, enabled)

Interval:

[sec]

Values

#	Name	Formula i	Decimals	Stats	Hide	Axis
1

	Close